DIFFERENCE
00:00
PUZZLE
TIMER
00:00
CLUES
00
- 30 SEC
ROOM TIMER
30 SEC +
00:00:00
MANUAL OVERRIDE
00:00
HIT NEXT: When vent opens.
Place the Circuit Control (Gold Magnet) onto the silver squares at the bottom. This will show you a pattern of three lights in the grid. Match the pattern in the middle to the red lights in the Manual Override and then clip the jumper cables onto that rod.
(More Info) Make sure you use the cable that corresponds with the colour and position of the Circuit Control. If the Circuit Control is in the left red (positive) spot, then you need to clip on the left, red cable.
Manual Override
Reset the Tapo switch 'V3- Manual Override' if the puzzle isnt working, and then press the HQ switch labeled 'keyturn' to trigger the Manual Override puzzle again.
Vent
Turn off the Tapo switch ‘V4 - Vent’ to manually open the escape vent.
After groups turn both keys together, the Manual Override will unlock.
Inside is a magnet and four cables
Putting the magnet into each of the four silver squares, will activate a unique LED pattern.
Groups can match the LED patterns to the ones shown above the pegs and clip the cables to the corresponding peg.
When all four cables are connected to the correct spots, the abort button will unlock.
Once the abort button is pressed, the vent at the end of the hallway will open.
The final step is to Escape™ by crawling through the vent space into the foyer.
